The series 107 comprises a range of 2-way normally closed solenoid valves with servo-assisted diaphragm. The size of these valves ranges from ¼”G (BSP) to 3”G (BSP). Because of ACL’s experience in producing this type of valve, most members of the 107 series will operate from a minimum differential pressure as low as 0.15 bar (approx. 2psi).
The body and valve top cover are manufactured from hot-stamped brass. The armature tube is stainless steel. The moving armature (plunger) and the fixed armature (core) are produced from magnetic stainless steel, stainless-steel armature return spring and diaphragm closure springs are fitted.
For the diaphragm, armature seal ACL offer a choice of seal materials – NBR (Buna, nitrile), FPM (FKM) and EPDM. Nitrile provides a cost-effective seal for air and water use, FPM is well suited to vacuum and mineral oil based media while EPDM is suitable for water, hot water and glycol based fluids, EPDM should not be used with oil based liquids.
Minimum differential pressure 0.15 bar, maximum allowable pressure 25 bar. The maximum allowable pressure PS for steam is 2,5bar (gauge pressure). Maximum operating pressure for 107 solenoid valves up to ½” is 15 bar (217 psi), ¾” is 13 bar and 10 bar for 1” to 2”. Maximum fluid viscosity 25cSt (mm ²/s)
Options (call Beta Valve sales office for details):
Electroless nickel plating
Series 7 explosion proof coil according to ATEX - EExmII (sizes 1/4" - 1 1/4" only)
Version with slow closing diaphragm (sizes 1/4" - 1 1/4" only)
Version for vacuum applications (air/gas)
Certified versions: SVGW SSIGE (sizes 1/4" - 1 1/4" only)
UL certified coils
The series 107 can be used with fluids compatible with the materials of construction with a viscosity not exceeding 25cSt (mm ²/s).
Two ranges of ACL's standard coils are used for the 107 series the Type 3 for valves sized 1¼” and below and Type 2, for valves sized 1¼” and larger. These coils offer a choice of standard direct current and operating voltages from 12V to 48V (DC) and 380V (AC). These coils are designed for continuous duty (100%ED) at the rated maximum ambient temperature.
ACL offer a choice of solenoid coil insulation class - class F coils which allow the valve to be used in an ambient temperature range of between -10°C +55°C and class H coils which increase the maximum allowable ambient temperature to +80°C. These coils are designed to be used according to type with DIN 46244 or DIN 43650A electrical connectors; with the connector fitted they offer IP65 protection and IP00 without connector. For hazardous areas ATEX certified explosion proof coils are available to EExmII (Type 7 - see A107 range ).
Electrical Features - Protection class IP, insulation class, service and power information for ACL coils.
Seal Materials - A quick guide to the seal materials used in our solenoid valves.
Units Of Measure - Commonly used physical and technical units symbols.
Technical Tables - Technical tables for pressure, steam, viscosity, temperatures and gravity.
Valve Response Times - Response time information for ACL solenoid valves
Flow Calculation - (Kv) - We help explain how to work out your valves KV
For more informative articles view our WIKI page