ACL Type 3 solenoid coil 240V AC - Class F
ACL Type 3 solenoid coil 240V AC - Class F
Stock Code: E30F
Our Price (Ex VAT): £16.02
In Stock

Solenoid coil for ACL valves, type 105, 305, 107 and 207 (up to 1" BSP).

Voltage: 240V 50/60Hz
Power Consumption: 8VA
Insulation class: F
Duty Cycle:100%
Supplied without Connector: requires CNE Small

The Series 3 solenoid coils from ACL are designed for use with ACL's 105, 305, 107 and 207 (up to 1" BSP) brass solenoid valves and their stainless steel counterparts.

These coils are fully over moulded with Fibre-glass Nylon which also encapsulates the zinc-plated steel magnetic flux bracket. The coil is secured to the solenoid valve by a central nut (supplied with valve).

Electrical connection according to DIN 43650 A. This coil matched the Beta Valve connector code CNE Small.

  • Class F - Fibre-glass Nylon
  • Class H - Fibre-glass Polyarylamide
  • Magnetic circuit: Zinc-plated steel
  • Windings: Copper covered with class H insulation
  • Electrical connection through cable
  • Special powers and voltages
  • Self-extinguish
  • Certified version

Further Reading.

Electrical Features - Protection class IP, insulation class, service and power information for ACL coils.
Seal Materials - A quick guide to the seal materials used in our solenoid valves.
Units Of Measure - Commonly used physical and technical units symbols.
Technical Tables - Technical tables for pressure, steam, viscosity, temperatures and gravity.
Valve Response Times - Response time information for ACL solenoid valves
Flow Calculation - (Kv) - We help explain how to work out your valves KV

For more informative articles view our WIKI page

1/2" BSP - 2-way normally closed brass servo assisted solenoid valve - 12mm orifice NBR seal
Our Price (Ex VAT): £77.30
In Stock