1/2" BSP - 2-way normally open S.Steel assisted lift solenoid valve - 12mm orifice EPDM seal
1/2" BSP - 2-way normally open S.Steel assisted lift solenoid valve - 12mm orifice EPDM seal
Stock Code: E277DE12
Our Price (Ex VAT): £533.55
Call or email for availability

Normally open servo assisted stainless steel solenoid valve supplied without solenoid coil, suitable for air, vacuum, hot/cold water, glycol based fluids and other non-corrosive fluids. EPDM should not be used with oil based liquids.

Orifice (mm): 12
Pressure range(bar): 0.15 - 15 bar
Seal type: EPDM
Supplied without coil: requires Type 3
Connector type: CNE small sold separately

The Series 277 is a line of 2 way normally open solenoid valves in 316 stainless steel with a servo-assisted diaphragm. The series 277 are almost completely constructed in stainless steel, the body in 316 stainless while the plunger (moving armature) and core (fixed armature) are produced in a magnetic grade of stainless steel. The size of these valves ranges from 3/8”G (BSP) to 1”G (BSP). Because of ACL’s experience in producing this type of valve, most members of the 277 series will operate from a minimum differential pressure as low as 0.15 bar (approx. 2psi).

For the diaphragm, armature seal ACL offer a choice of seal materials – NBR (Buna, nitrile), FPM (FKM) EPDM and WRAS EPDM. Nitrile provides a cost-effective seal for air and water use, FPM is well suited to vacuum and mineral oil based media while EPDM is suitable for water, hot water and glycol based fluids, EPDM should not be used with oil based liquids.

Minimum differential pressure 0.15 bar, maximum allowable pressure 25 bar. The maximum allowable pressure PS for steam is 2,5bar (gauge pressure). Maximum fluid viscosity 25cSt (mm ²/s)

Options (call Beta Valve sales office for details):

Food approval seal material
Series 7 explosion proof coil according to ATEX - EExmII
Version with slow closing diaphragm
Version for use with oxygen
Silver shading ring
UL certified coils

The series 277 can be used with fluids compatible with the materials of construction with a viscosity not exceeding 25cSt (mm ²/s).

ACL's standard Type 3 coils are used for the 277 series valves. These coils offer a choice of standard direct current and operating voltages from 12V to 48V (DC) and 380V (AC). These coils are designed for continuous duty (100%ED) at the rated maximum ambient temperature.

ACL offer a choice of solenoid coil insulation class - class F coils which allow the valve to be used in an ambient temperature range of between -10°C +55°C and class H coils which increase the maximum allowable ambient temperature to +80°C. These coils are designed to be used according to type with DIN 46244 or DIN 43650A electrical connectors; with the connector fitted they offer IP65 protection and IP00 without connector. For hazardous areas ATEX certified explosion proof coils are available to EExmII (Type 7 - see A177 range ).

Further Reading.

Electrical Features - Protection class IP, insulation class, service and power information for ACL coils.
Seal Materials - A quick guide to the seal materials used in our solenoid valves.
Units Of Measure - Commonly used physical and technical units symbols.
Technical Tables - Technical tables for pressure, steam, viscosity, temperatures and gravity.
Valve Response Times - Response time information for ACL solenoid valves
Flow Calculation - (Kv) - We help explain how to work out your valves KV

For more informative articles view our WIKI page