Normally closed 2 way direct acting brass solenoid valve supplied without solenoid coil, typically used with compressed air, petrol, diesel and other oil-based fluids.

Orifice (mm): 3.0
Pressure range(bar): 0-14 bar**
Seal type: FPM
Supplied without coil: requires Type 2  coil
Connector type: requires CNE large 

The W106 series is a range of 2-way normally closed direct acting poppet type solenoid valves. This series features a brass body. The armature tube is produced in stainless steel.

The moving and fixed armatures are made from stainless steel. The return spring is also produced from stainless steel.

The armature seal and armature tube O-rings are supplied in FPM.

The maximum allowable pressure for most media is 50 bar**, although the maximum pressure for steam is 6 bar (gauge pressure) with PTFE seals and 2.5 bar with EPDM seals (above these pressures the temperature of the steam would exceed the maximum allowable temperature for the seals).

For ease of integration into product design the these valves may be mounted in any orientation.

ACL's standard Type 2 coils are compatible with the W106 series of valves, these coils offer a choice of standard direct current and operating voltages from 12V to 48V (DC) and 380V (AC). These coils are designed for continuous duty (100%ED) at the rated maximum ambient temperature.

ACL produce both class F and class H coils to fit the Series W106, these coils are continuously rated with ED=100%, when fitted with the Class F coils the ambient temperature range is: -10°C +55°C with class H coil the maximum ambient temperature is +80°C. These solenoid valves can be mounted in any position.

** Dependent on valve/coil combination chosen.

Further Reading.

Electrical Features - Protection class IP, insulation class, service and power information for ACL coils.
Seal Materials - A quick guide to the seal materials used in our solenoid valves.
Units Of Measure - Commonly used physical and technical units symbols.
Technical Tables - Technical tables for pressure, steam, viscosity, temperatures and gravity.
Valve Response Times - Response time information for ACL solenoid valves
Flow Calculation - (Kv) - We help explain how to work out your valves KV

For more informative articles view our WIKI page