Normally open direct acting brass solenoid valve, suitable for air, water and mineral oil based fluids.

Pressure Range: 0-14 bar AC (0-3bar DC)
Seal material: FPM
Note: 1/8"BSP

Supplied without coil: requires Type 3 Coil.

Data Sheet/Certifications:

The W105 is a proven range of 2 way normally closed solenoid valves. The W105 is distinguished by its in-line configuration which gives the valve a very small form- factor.

The W105 features a compact brass body and armature tube. The moving armature and the fixed armature (core) are produced from magnetic stainless steel. The seal is FPM (EPDM is available to special order).

For this type of valve the maximum allowable pressure is: the max operating pressure +10%. The maximum fluid viscosity is 25cSt (mm ²/s).

The W105 uses the ACL Type 3 solenoid coils, these are available in standard voltages from 12v to 380v, when used at their rated voltage they are suitable for continuous use (ED= 100%). When fitted with a class F coil the ambient temperature range is -10°C +55°C. By using a class H coil the maximum ambient temperature is extended +80°C. When fitted with a suitable DIN connector the coil is protected to IP65.

The W105 can be mounted at any orientation

Further Information.

Electrical Features - Protection class IP, insulation class, service and power information for ACL coils.
Seal Materials - A quick guide to the seal materials used in our solenoid valves.
Units Of Measure - Commonly used physical and technical units symbols.
Technical Tables - Technical tables for pressure, steam, viscosity, temperatures and gravity.
Valve Response Times - Response time information for ACL solenoid valves
Flow Calculation - (Kv) - We help explain how to work out your valves KV

For more informative articles view our WIKI page