Voltage: 24V DC
Power Consumption: 27W
Insulation class: H
Duty Cycle:100%
Supplied without Connector: requires CNE large
The Series 5 range is a line of encapsulated solenoid coils suitable for ACL brass and stainless-steel solenoid valves including the popular E106, E206 and their stainless steel versions the E110 and E210. The extra pulling power of the Series 5 coils is especially useful in the assisted lift E108 and direct-acting E109 solenoid valves.
The Series 5 solenoid coils incorporate a Zinc-plated steel flux bracket. The coil is secured on the solenoid valve by a central nut (supplied with valve).
Electrical connection according to DIN 43650A, Beta's standard connector for this coil is the type CNE large.
As standard all Series 5 coils offer Class H insulation, being encapsulated in Fibre-glass Polyarylamide. The coil windings are copper covered with class H insulation.
Further Reading.
Electrical Features - Protection class IP, insulation class, service and power information for ACL coils.
Seal Materials - A quick guide to the seal materials used in our solenoid valves.
Units Of Measure - Commonly used physical and technical units symbols.
Technical Tables - Technical tables for pressure, steam, viscosity, temperatures and gravity.
Valve Response Times - Response time information for ACL solenoid valves
Flow Calculation - (Kv) - We help explain how to work out your valves KV
For more informative articles view our WIKI page