Solenoid coils for ACL valves, type 105, 305, 107 and 207 (upto 1" BSP), Beta E550/F550

Data Sheet:

(opens in a new window)

The Series 4 range is a line of encapsulated solenoid coils suitable for ACL brass and stainless-steel solenoid valves including the popular E105, E305 and E107 types. The Series 4 solenoid coils can be used to replace the Type 3 coil in valve application where an increased operating voltage is required. In these uses the Type 4 coil will often consume less power (compare data sheets).

These coils incorporate a Zinc-plated steel flux bracket. The coil is secured on the solenoid valve by a central nut (supplied with valve).

Electrical connection according to DIN 43650A, Beta's standard connector for this coil is the type CNE LARGE.

Series 4 coils are available with Class F or Class H insulation, the Class F coils are encapsulated in Fibre-glass Nylon, Class H coils are ecapsulated Fibre-glass Polyarylamide. The coil windings for all Series 4 coils are copper covered with class H insulation.

OPTIONS (Contact Beta sales office):

• Electrical connection through cable
• Special coil powers
• Special coil voltages
• Self-extinguish ED

  CODE		AC (50/60Hz) Voltage	Direct Current Voltage	Power		Voltage tolerance		Connector	Service ED
  Insulation class F	Insulation class H			Alternating Current (VA)	Direct Current (Watts)	AC	DC
  E40A	E42A	12	---	11	5	+15%/-10%	±10%	CNE LARGE	100%
  E40B	E42B	24	---
  E40C	E42C	48	---
  E40D	E42D	110	---
  E40E	E42E	220/230	---
  E40F	E42F	240	---
  E40G	E42G	380	---
  E40015	E420	---	12
  E40115	E421	---	24
  E402	E422	---	48
  At nominal voltage and an ambient temperature of 20°C