Solenoid coils for ACL valves, type 105, 305, 107 and 207 (upto 1" BSP), Beta E550/F550

Voltage:12V DC
Power Consumption: 5 W
Insulation class: F
Duty Cycle:100%

Data Sheet/Certifications:

The Series 4 range is a line of encapsulated solenoid coils suitable for ACL brass and stainless-steel solenoid valves including the popular E105, E305 and E107 types. The Series 4 solenoid coils can be used to replace the Type 3 coil in valve application where an increased operating voltage is required. In these uses the Type 4 coil will often consume less power (compare data sheets).

These coils incorporate a Zinc-plated steel flux bracket. The coil is secured on the solenoid valve by a central nut (supplied with valve).

Electrical connection according to DIN 43650A, Beta's standard connector for this coil is the type CNE LARGE.

Series 4 coils are available with Class F or Class H insulation, the Class F coils are encapsulated in Fibre-glass Nylon, Class H coils are ecapsulated Fibre-glass Polyarylamide. The coil windings for all Series 4 coils are copper covered with class H insulation.

OPTIONS (Contact Beta sales office):

• Electrical connection through cable
• Special coil powers
• Special coil voltages
• Self-extinguish

Further Reading.

Electrical Features - Protection class IP, insulation class, service and power information for ACL coils.
Seal Materials - A quick guide to the seal materials used in our solenoid valves.
Units Of Measure - Commonly used physical and technical units symbols.
Technical Tables - Technical tables for pressure, steam, viscosity, temperatures and gravity.
Valve Response Times - Response time information for ACL solenoid valves
Flow Calculation - (Kv) - We help explain how to work out your valves KV