Solenoid valve 2 way normally closed with servo-assisted piston suitable for air and water. Its requested a minimum differential pressure of 3 bar. Media viscosity must not exceed 25cSt (mm ²/s).

 
Pressure range: 3-100 bar
Supplied without coil: requires Type 2 Coil.

Data Sheet/Certifications:

 

The series 124 solenoid valve manufactured in Italy by ACL srl, are a family of 2-way normally closed high-pressure  solenoid valves employing a servo-assisted piston.

The body and cover of the 124 are manufactured in brass, the armature(plunger), armature tube and core, springs and top cover bolts are stainless steel. The piston ring is produced from reinforced PTFE, the main (piston) seal is also reinforced PTFE, the pilot seal is FPM.

Optionally, these solenoid valves can have the brass body electroless nickel plating, typically to protect against corrosion.

Key features of the 124 series is the minimum differential pressure of 3 bar and the maximum allowable pressure of 100 bar. The 124 is primarily designed for air and water, but can be used with other fluids compatible with the materials of construction and whose viscosity does not exceed 25cSt (mm ²/s).

The 124 can be fitted with ACL's Type 2 coils, when fitted with a solenoid coil with class F insulation the maximum ambient temperature is +95°C.  It is recommended that the 119 series be mounted with the armature tube vertical(solenoid coil above the valve).

Further Reading.

Electrical Features - Protection class IP, insulation class, service and power information for ACL coils.
Seal Materials - A quick guide to the seal materials used in our solenoid valves.
Units Of Measure - Commonly used physical and technical units symbols.
Technical Tables - Technical tables for pressure, steam, viscosity, temperatures and gravity.
Valve Response Times - Response time information for ACL solenoid valves
Flow Calculation - (Kv) - We help explain how to work out your valves KV

For more informative articles view our WIKI page