Brass normally closed manifold solenoid valve supplied without solenoid coil, typically used with compressed air, petrol, diesel, other oil-based fluids.
Flange: Q 25
Supplied without coil: requires Type 3 Coil.
Data Sheet/Certifications:
The 112 series is an established range of 2-way normally closed direct acting poppet type solenoid valves. This series features a hot-stamped brass body, with a choice of 1.2mm, 1.5mm, 2mm, or 2.5mm orifices. The armature tube is produced in stainless steel.
The moving and fixed armatures are made from magnetic stainless steel. The return spring is also produced from stainless steel.The armature seal and armature tube o-rings can be supplied in a choice of material; buna (NBR, nitrile), EPDM or FPM.
The maximum allowable pressure for most media is 50 bar, although the maximum pressure for steam is 2.5 bar (gauge pressure) above these pressures the temperature of the steam would exceed the maximum allowable temperature for the seals.
The valve body is equiped with four mounting holes, for ease of integration into product design the these valves may be mounted in any orientation.Brass bodies may optionally be electro-less nickel plated and/or include a stainless steel armature tube.
Maximum fluid viscosity 25cSt (mm ²/s).
Two ranges of ACL's standard solenoid coils are compatible with the 112 series the Type 3 and Type 4, these coils offer a choice of standard direct current and operating voltages from 12v to 48v (dc) and 380v (ac). These coils are rated for continuous duty (100%ED).
ACL offer a choice of solenoid coil insulation class - class F coils which allow the valve to be used in an ambient temperature range of between -10°C +55°C and class H coils (standard for Type 5 coils) which increases the maximum ambient temperature to +80°C. For hazardous areas ATEX certified explosion proof coils are available to ATEX - EExmll Series 7.
These coils are designed to be used with DIN 43650A electrical connectors, with the connector fitted they offer IP65 protection and IP00 without connector.
Orifice size from 1.2 mm to 2.5 mm, all the valves will operate from zero pressure, the smallest standard orifice of 1.2 mm allows the valve to operate up to 25 bar.
Example product code: E1126XB20///30B: 2mm orifice, NBR seal, coil 24V AC
Further Information.
Electrical Features - Protection class IP, insulation class, service and power information for ACL coils.
Seal Materials - A quick guide to the seal materials used in our solenoid valves.
Units Of Measure - Commonly used physical and technical units symbols.
Technical Tables - Technical tables for pressure, steam, viscosity, temperatures and gravity.
Valve Response Times - Response time information for ACL solenoid valves
Flow Calculation - (Kv) - We help explain how to work out your valves KV
For more informative articles view our WIKI page
