Normally closed 2 way brass solenoid valve, suitable for use with air, water, oil and other non-corrosive fluids.
Orifice (mm): 1.2
Pressure range(bar):Type 2 coil 0.5 bar or Type 5 coil 0-0.8 bar**
Seal type: NBR
Supplied without coil: requires type 2 or type 5 coil
Connector type: CNE Large
The 107 series comprises a range of 2-way normally closed direct acting poppet type solenoid valves. This series features a hot-stamped brass body, with a choice of 3/8", 1/2" or 3/4" BSP (G) threaded ports. The armature tube is produced in stainless steel.
The moving and fixed armatures are made from magnetic stainless steel and the return spring is also produced from stainless steel.
The armature seal and armature tube o'rings can be supplied in a choice of material; NBR, EPDM or FPM.
The maximum allowable pressure for most media is 0.8 bar.**
For ease of integration into product design the these valves may be mounted in any orientation.
Options (call Beta Valve sales office for details):
Electroless nickel plating
Factory degreasing for oxygen
UL approved coils
Maximum fluid viscosity 25cSt (mm ²/s).
Two ranges of ACL's standard solenoid coils are compatible with the 109 series the Type 2 and Type 5, these coils are available in standard voltages from 12V to 380V AC and 12V to 48V DC. These coils are rated for continuous duty (100%ED).
ACL offer a choice of solenoid coil insulation class - class F coils which allow the valve to be used in an ambient temperature range of between -10°C +55°C and class H coils (standard for Type 5 coils) which increases the maximum ambient temperature to +80°C.
These coils are designed to be used with our CNE large electrical connectors, with the connector fitted they offer IP65 protection and IP00 without connector.
Orifice sizes are either 1.2 mm or 1.8 mm, all the valves will operate from zero pressure.
Example product code: E109EV18/52B: 3/4" threaded ports, FPM seal, coil 24V AC
** Dependent on valve/coil combination chosen.
Further Reading.
Electrical Features - Protection class IP, insulation class, service and power information for ACL coils.
Seal Materials - A quick guide to the seal materials used in our solenoid valves.
Units Of Measure - Commonly used physical and technical units symbols.
Technical Tables - Technical tables for pressure, steam, viscosity, temperatures and gravity.
Valve Response Times - Response time information for ACL solenoid valves
Flow Calculation - (Kv) - We help explain how to work out your valves KV
For more informative articles view our WIKI page