3 way diverting plastic solenoid valve, suitable for air, water and other neutral fluids.
Voltage: 12V DC
Pressure range: 0-0.4 bar
Inlet/outlet style: 5 mm hosetail
Orifice: 3.2 mm
Data Sheet/Certifications:
Manufactured by ACL srl, D330 series is a line of miniature 3-way solenoid valves, these valves feature a direct acting construction with a dry armature. In this media seperated design there are no metal parts in contact with the media.
Available in two verisions - normally closed and diverting (see table below).
The body is produced in acetal copolymer with an NBR(nitrile) seal, the valve can be used with any media compatible with these materials with a maximum fluid viscosity 25cSt (mm ²/s) and temperature of less than 50°C .
The maximum allowable pressure is 0.5 bar. Maximum . Ambient temperature: -10°C +45°C. The E330 can be mounted in any position.
330 Series solenoid valves and coils are not supplied separately.
- Duty cycle: ED100%
- Insulation class: F
- Voltage tolerance: ±5%
- Protection class: IP65 with connector fitted
Further Reading.
Electrical Features - Protection class IP, insulation class, service and power information for ACL coils.
Seal Materials - A quick guide to the seal materials used in our solenoid valves.
Units Of Measure - Commonly used physical and technical units symbols.
Technical Tables - Technical tables for pressure, steam, viscosity, temperatures and gravity.
Valve Response Times - Response time information for ACL solenoid valves
Flow Calculation - (Kv) - We help explain how to work out your valves KV
