Normally open 2 way direct acting brass solenoid valve supplied with solenoid coil, suitable for air, water, steam and other non-corrosive fluids and gases.

Orifice (mm): 4.5mm
Pressure range(bar): 0-7 bar
Seal type: FKM
Voltage: 24V DC 8Watts
Coil encapsulation: IXEF
Connector type required: CNE Large sold separately

The 175 series from Saturn Magnetic are an established range of 2-way normally closed brass bodied direct acting solenoid valves. The body provides 1/8" - 1/4" (BSP) inlet and outlet ports. This series features a brass body, with a stainless steel armature tube. The body may be optionally chemically nickel plated. The moving and fixed armatures are made from stainless steel. The return spring is also produced from stainless steel.

The seal can be supplied in a choice of material; EPDM or FKM.

The maximum allowable pressure for most media is 17 bar**, although the maximum pressure for steam is 5 bar. (gauge pressure) as above this the temperature of the steam would exceed the maximum allowable temperature for the seals.

Orifice size from 2.8 mm to 4.5 mm, all the valves will operate from zero pressure; the smallest standard orifice of 2.8 mm allows the valve to operate up to 17 bar.** Maximum operating pressure depends on the orifice size (larger orifice sizes reduce the maximum operating pressure), type of coil used and the use of AC or DC voltages.

Options and Accessories (call Beta Valve sales office for details):

Hose holder
Chemical nickel plating
Filter on inlet

** Dependent on valve/coil combination chosen.