6-mm push-fit connections, 2-way normally open solenoid valve, 2.2-mm orifice, 230V AC
Enlarge
6-mm push-fit connections, 2-way normally open solenoid valve, 2.2-mm orifice, 230V AC
Stock Code: 701A22AT 230AC
RRP (Ex VAT): £0.00
Call or email for availability

Normally open direct acting plastic solenoid valve, suitable for water and other neutral fluids.


Inlet/Outlet ports: 6 mm push-fit
Orifice size: DN 2,2 mm
Pressure range: 0-6 bar
Operating voltage: 230V AC
Electrical connection: Flying leads
Seal material: NBR
Ambient temp: 60°C
Maximum media temp: 60°C

Data Sheet/Certifications:


The Series 700 latching solenoid valves are a line of direct-acting solenoid valves designed to operate from zero pressure up to the maximum working pressure of (depending on valve orifice size) up to 10 bar.

The valve body is produced in glass filled nylon with the seal in NBR (buna) rubber. The armature and return spring are manufactured in stainless steel.

The maximum allowable water temperature is 65ºC.

Manufactured by RPE srl, 700-Series latching solenoid valves are designed for battery powered applications where the low power consumption offered by latching operation, which requires only a 20ms pulse to actuate the valve, makes it possible to produce equipment that would otherwise have required a mains power source. These valves can be supplied with threaded or push-fit inlet and outlet connection styles. Electrical connection can be by faston tag, wire or cable.

The compact size of the 700-Series solenoid valves makes them suitable for a wide range of household and commercial applications such as ice making machines, water dispensers, industrial ovens, taps, hydromassage, coffee makers, irrigation and high pressure jet washers.