Single inlet/outlet mains water solenoid valve.

Inlet port: 3/4" BSP male thread with filter
Outlet port: 8mm push-in fitting
Inlet flow control: 10l/min fitted as standard
Outlet flow control: Not available
Pressure range: 0.2-10 bar
Ambient temp: Tu 60°C
Maximum Media temperature: 60°C continuous duty, 90ºC 60% ED.
Valve orifice: DN 10 mm
Operating voltage: 230V AC
Mounting bracket: Steel bracket fitted

Data Sheet/Certifications:

The valve body is produced in glass filled nylon with the diaphragm (seal) in NBR (buna) rubber. The armature and return spring are manufactured in stainless steel.

The solenoid coils feature F class insulation rated for maximum temperature of 155°, this allows the coil to be operated continuously (100% ED) when the water temperature does not exceed 60º and 50% ED up to the maximum water temperature of 90ºC.

Manufactured by RPE srl, R-Series water-inlet solenoid valves offer a choice of configurations: including alternative, outlet position and otlet connection style. Hosetail connections for flexible tubing is available across the range and many types offer versions with push-fit connections.

The R-Series valves are suitable for a wide range of household and commercial appliance applications or wherever automatic water control is needed. These valves may be installed i any position, many types are supplied with a fitted metal or plastic mounting bracket. The R-Series is certified for use with potable water by a number of approvals authorities. Approvals include: AQS, KTW and WRAS.