Normally open 2 way plastic solenoid valve, suitable for water and other neutral fluids.
Minimum order quantities apply to this product. Please contact our sales office on 01494 459 511 for further information.
Suitable for drinking water use.
Inlet/Outlet ports: 15-mm push-fit connections.
Pressure range:0.2-10 bar
Ambient temp: Tu 60°C
Maximum Media temperature: 60°C continuous duty, 90ºC 60% ED.
Valve orifice: DN 10 mm
Voltage: 240V 50/60Hz
Power consumption: 6.67 VA
Electrical connection:Fast-on tags
Series R-Mini solenoid valves are produced in Italy by RPE s.r.l.. These 2-way normally-open solenoid valves offer easy connection to 15-mm pipework using John Guest push-fit connectors on the inlet and outlet.
The operating pressure range is 0.2 – 10 bar (3 – 145 psi). They are continuously rated (100% ED) in an ambient temperature of up to 60ºC, with a maximum fluid temperature of 60°C; the R-Mini series can be used with a fluid temperature up to 90ºC which reduces the maximum duty cycle to 60% ED.
The valve body material is glass filled nylon, the diaphragm seal is produced from NBR (Buna). Electrical connection by fast-on tags.
Normally-closed and latching (bistable) versions of the R-Mini series are also available, the R-Mini valves can be supplied with hosetail, male or female threaded connections or John Guest push-fit connections. Electrical connections for most styles can be specified as flying leads, fast-on tags or bi-polar cable. The Mini-R series are available with WRAS, ACS, KTW and UL approved versions. These versatile solenoid valves are suitable for a wide range of applications where automatic water control is needed: water filling in small water heaters and boilers, water filtration plants, refrigerators, ice machines, water dispensers, industrial ovens, electronic taps, coffee makers, irrigation, high pressure jet washers.
