|
Flow Sensors
for Water
|
|
 
|
- Low cost
- Light weight
- Suitable for potable water use
- WRAS approved
- Available as flow sensor only or
combined with solenoid valve
- Wide variety of fitting sizes from
1/8" - 3/4" BSP and push-in fittings
- Hall effect sensor
- Wide operating voltage for sensor
from 3.8 - 30vdc
The RF range of flow sensors can be
used in numerous applications where water flows is to be measured at low cost.
|
|
| RF series
2/2 solenoid valve with flow sensor for water |
| Type |
Inlet Port Size |
Outlet Port Size |
Max Flow |
Differential Pressure |
Seal |
| Min |
Max |
| RF002003 |
¾"BSP |
¾"BSP |
10l/min |
0.2 |
10 |
NBR |
| RF00175 |
15mm push-in |
15mm push-in |
10l/min |
| RF00105 |
¾"BSP |
¼"BSP |
7l/min |
|
| Solenoid valve can be
normally closed or latching (bistable). |
| Combined solenoid valve flow sensor datasheet |
|
| RF series water flow sensors |
| Type |
Port Size |
Max Flow |
Max Pressure |
Temp ºC |
| RF3110B |
1/4” BSP male |
7l/min |
10 |
0-75 |
| RF4110B |
3/8” BSP male |
| RF5110B |
1/2” BSP male |
| RF6110B |
3/4” BSP male |
| RF1170B |
15mm push-in |
| RF2100B |
1/8” BSP female |
| RF3100B |
1/4” BSP female |
| RF4100B |
3/8” BSP female |
|
| RF series flow sensors
are available with WRAS approved for potable water use |
| RF series datasheet |
