|
Filter
Housings & Cartridges by Flowmatic
|
|
 |
This page has now been
replaced, please go to: Filter
housings: http://www.betavalve.com/housings.htm
Filter cartridges: http://www.betavalve.com/cartridges.htm
A full range of 5", 10"
and 20" filter housing for 2 ¾" and 4½" diameter cartridges to suit most
water filtration requirements.
- Housings made from NSF listed, FDA
grade 100% polypropylene.
- Pressure release caps as standard.
- Cycle tested 0-150psi -100,000
cycles.
- Suitable for food or potable water
use.
- EPDM o-rings standard.
- Mounting brackets and tools
available.
- Full range of sizes.
- Replacement filter cartridges -
carbon, pleated polyester, spun and yarn filters available.
|
|
| Filter
housings |
| Produce Code |
Port Size |
Cartridge Size |
| FH4200BL12PR |
½” |
2½” x 10” |
| FH4200BL34PR |
¾" |
2½” x 10” |
| FH5000BL1PR |
1” |
4½” x 10” |
| FH10000BL34PR |
¾" |
4½” x 20” |
| FH10000BL1PR |
1” |
4½” x 20” |
| FH10000BL15PR |
1½” |
4½” x 20” |
| FH4200BL34 |
¾" |
2½” x 10” |
| FH4200CB12 |
½” |
2½” x 10” |
| FH4200CB34 |
¾" |
2½” x 10” |
| FH8000CB34 |
¾" |
2½” x 20” |
| FH4200BL12 |
½” |
2½” x 10” |
| FH8000BL34 |
¾" |
2½” x 20” |
| FH8000BL34P |
¾" |
2½” x 20” |
| FH5000BL15P |
1½” |
4½” x 10” |
| FH500CW12 |
½” |
2½” x 5” |
|
|
| Replacement
filter cartridges |
| Type of Filter |
Micro Rating |
Size |
Description |
| Extruded Carbon Filters |
2, 5or 10 |
2 ½” x 10”
2 ½” x 20” |
High VOC reduction |
| Pleated Polyester Filters |
1, 5 and 20 |
2 ½” x 10”
4 ½” x 10” 4 ½” x 20” |
NEW Flow Max Pleated cartridges give longer life |
| Spun Filters |
1 and 5 |
2 ½” x 10” |
For aggressive chemicals and general filtration |
| Yarn Wound Filters |
1, 5,10 or 30 |
2 ½” x 10”
2 ½” x 20” |
FDA Grade Polypropylene fibres |
|
| Contact
Beta Valve for full filter listing. |
