- Top Selling Items
- Brass Solenoid Valves
- Stainless Steel Soleno...
- Plastic Solenoid Valves
- Pneumatic Valves
- Vending Solenoid Valves
- Hazardous Area Valves
- Water Meters
- Water Treatment & Filt...
- Liquid Level Switches
- Pressure Switches
- Irrigation Controls
- Electrical Connectors
Product Detail< Back
Requires coil: Type 2
Pressure: 0-12 bar
Note: No shading ring fitted - for DC use only
Technical Data Sheet (opens a new window)
Manufactured by ACL srl the Series 210 comprises a range of 2 way normally open direct acting solenoid valves. Featuring a stainless-steel body, armature tube and springs. The fixed and moving armatures are produced in magnetic stainless steel.
In order to maximise chemical compatibility with the media the Series 210 offers a choice of seal material: NBR (nitrile), FPM (fluoroelastomer) or EPDM.
For most media the Series 210 can be used at up to a maximum pressure of 50 bar, for steam the maximum allowable pressure PS is 2,5bar (gauge pressure). Maximum fluid viscosity is 25cSt (mm ²/s).
ACL produce both class F and class H coils to fit the Series 210, these coils are continuously rated with ED=100%, when fitted with the Class F coils the ambient temperature range for the valve is: -10°C +55°C with class H coil this increases to +80°C. These solenoid valves can be mounted in any position.
Several options are available (contact Beta Valve sales office) these include: Silver shading ring, factory degreasing for use with oxygen.
For ease of fitting in confined spaces the Series 210 can be mounted in any position, the body included two M6 tapped holes for fixing screws.